“”

CC-LinkIE-TSN Stack

Product finder »
CC-LinkIE/TSN Stack

Industrial Ethernet with 1 Gbit/s or 100 Mbit/s bandwidth and Time Sensitive Networking (TSN)

allowing transmission of deterministic real-time traffic and standard Ethernet traffic (Webserver, FTP, SNMP, etc. …) over the same network

Realized with standard components CC-Link IE TSN (shop floor)

can be integrated into higher level IT networks (office floor, e.g. ERP) to realize Smart Factories (Industrie 4.0)

CC-Link IE TSN uses IEEE 802.AS for time synchronization and IEEE 802.1Qbv for scheduling

  • alternatively, IEEE 1588v2 can be used for time synchronization
  • Cycle Time is divided into timeslots for:
    • Cyclic communication
    • Time synchronization
    • Acyclic communication and standard Ethernet traffic (best effort)
  • acyclic communication is not disrupted by other traffic
  • Single-Master and Multi-Master Configurations are possible
  • Remote Station: slave station that can be controlled by a Master station
  • Local Station: slave station that can be controlled by a Master station and monitor the cyclic communication between master stations and other slaves

CC-LinkIE/TSN Master

  • Allows implementation of Management Master station and Control Master station
    • Management Master Station: Controls other slaves and manages network (only one station per network)
    • Control Master Station: controls other slaves and masters (zero or multiple CM stations per network)
  • supports time synchronization via IEEE 802.1AS and IEEE 1588v2 (both E2E and P2P delay mechanisms are supported)
  • supports both hardware and software implementation of TDMA-scheduling (IEEE 802.1Qbv)
    (software implementation is less deterministic but allows support of standard MAC controllers)
  • supports control communication (cyclic communication) with Slave stations and other Master stations
  • supports Transient Transmissions (acyclic communication) with other stations
    • reserved transient Transmission: acyclic communication within timeslot for cyclic communication
    • non-reserved Transient Transmission: acyclic communication within timeslot for standard Ethernet traffic
  • supports SLMP (Seamless Message Protocol) for acyclic data transfer
  • support of multiple cycle times


The Master perform control communication with multiple slaves with different cycle times. All cycle times must be a multiple of the smallest cycle time.

  • Cyclic Start/Stop: stop and restart cyclic transmission with other stations
  • Authentication Class B is possible

CC-LinkIE/TSN Slave

  • allows implementation of Remote Slave Station
  • supports time synchronization via IEEE 802.1AS and IEEE 1588v2 (both E2E and P2P delay mechanisms are supported)
  • supports both hardware and software implementation of TDMA-scheduling (IEEE 802.1Qbv)
    (software implementation is less deterministic but allows support of standard MAC controllers)
  • supports control communication (cyclic communication) with Master stations
  • supports Transient Transmissions (acyclic communication) with other stations
    • reserved transient Transmission: acyclic communication within timeslot for cyclic communication
    • non-reserved Transient Transmission: acyclic communication within timeslot for standard Ethernet traffic
  • supports SLMP (Seamless Message Protocol) for acyclic data transfer
  • Authentication Class B is possible

Ähnliche Produkte

CANopen Master / Slave DLL
CANopen Master / Sl...
CANopen Developer Starter Kit
CANopen Developer S...
AT-CAN-MINI
AT-CAN-MINI
J1939 Protocol Stack
J1939 Protocol Stack
J1939server
J1939server
Sensor-/Actuator-Box 14DIO/2 MiniIO
Sensor-/Actuator-Bo...
CC-LinkIE/TSN Stack
CC-LinkIE/TSN Stack

To top