“”
03.12.2015

new CANopen drivers available


new drivers for CANopen available

Port GmbH is constantly expanding support for new hardware platforms. New drivers and boot loader for the following platforms available:  Freescale, Infineon, ST Micro, Microchip, Renesas, Altera and Texas Instruments 

Of course, our CANopen Design Tool is up to date - a trial download can be found here (Linux and Windows)

the following drivers, bootloader and extensions are available

DP Altera Soc FPGA CycloneV - porting CANopen under QNX OS 

DP Freescale K10_K60 (0565/122)

Features: Single line , BasicCAN, 11bit  u. 29bit-IDsHW:  Freescale Modul TWR-K60F120MCompiler/IDE:  Eclipse GCC Cross Compiler Version: 8.3.0 in IDE Freescale Kinetis Design Studio Version: 2.0.0 

DP Freescale K10_K60  mit uCOSII (0565/128)

Features: Single line , BasicCAN, 11bit  u. 29bit-IDsHW:  Freescale Modul TWR-K60F120MCompiler/IDE: IAR Workbench for ARM v7.40 

DP Freescale Kinetis K2x (0565/121) 

Features: Single line , BasicCAN, 11bit  u. 29bit-IDsnote:  Eclipse GCC Cross Compiler Version: 8.3.0 (in IDE Freescale Kinetis Design Studio Version: 2.0.0)tested with Evalboard Freescale Modul TWR-K20D72M  (with CPU-Typ K20x)

DP TI TMS320F28335 

Features: Multi line , FullCAN, 11bit-IDsHW:  eZdsp TMS320F28355Compiler/IDE: actual Code Composer Studio version

DP Infineon XMC4800 (0565/126)

Features: multiline, BasicCAN, 11 u. 29bit Ids.Evalboard: Infineon XMC4800 Relax Kit V1 IDE/Compiler: Infineon Dave4 studio v4.1.4 with gcc and Eclipse C/C++ Development Tools v8.6.0

DP STM32L4xx (0565/127)

Features: single line, BasicCAN+FullCAN, 11 u. 29bit Ids.Evalboard: NUCLEO-L476RG (MB1136 rev C)IDE/Compiler: IAR Workbench for ARM v7.40 

Bootloader: 

DP STM32L4xx  Paulus Bootloader  (0271/15)

Features: LSS, Emergency, Auto-Start yes/no (optional). Debug-Output on usart optional possible. Evalboard:  NUCLEO-L476RG (MB1136 rev C)IDE/Compiler:  IAR Workbench for ARM v7.40

DP Renesas RX231 (0565/125)  

Features: single line, BasicCAN, 11+29bit Ids.Evalboard: Renesas Evaluation Board RSK+RX231IDE/Compiler: C/C++ compiler package for RX family V.2.03.00IDE: e2 studio Version: 4.01.007 

DP Renesas RL78/F13 

Features: Single line , BasicCAN, 11bit-IDs, no- global- variables (optional)HW:  Renesas StarterKit R5F10BMGCompiler/IDE:  IAR Workbench for RL78 v6.3 

DP Renesas RL78/F14 

Features: Single line , BasicCAN, 11bit-IDsHW:  Renesas StarterKit R5F10PPJCompiler/IDE: IAR Workbench for RL78 v7.0 

DP Renesas R-IN32M3 

Features: Single line , BasicCAN, 11bit-IDsHW:  Renesas Starterkit R-IN32M3-ECCompiler/IDE: IAR Workbench for ARM  v6.70 Note: CANopen

Drivers for the RZ/T, RX63, RX64 Family also availabe 

DP Microchip dsPIC33EVxx (0565/124) 

Features: Single line , FullCAN, 11bitCompiler/IDE: Microchip XC16 compiler v1.24 / MPLABX IDE v2.35 Board: CAN/LIN Starter Kit  (Microchip with CPU dsPIC33EV256x) 

DP Microchip dsPIC33EPxx (0565/123) 

Features: Multiline , FullCAN, 11bitCompiler/IDE: Microchip XC16 compiler v1.24 / MPLABX IDE v2.35 Board: Explorer 16 Board of Microchip with a dsPIC33EP512MU810 processor (PIM)