CPC-USB is a powerful low-cost CAN interface for the USB bus. It provides galvanically isolated CAN 2.0B ISO 11898 for CAN transfer rates up to 1 Mbit/s

USB-XS is one of the latest addition to the CAN interface technology. It not only can be used for industrial CAN applications like CANopen, but also for ECU's or vehicle field bus systems. CAN 2.0B ISO 11898 for CAN transfer rates up to 1 Mbit/s and K-Line are supported.

Low cost and small USB CAN Interface which can be used with all CAN tools and software stacks.

CPC-PCI and CPC-PCIe are powerful CAN interface for PCs with PCI resp. PCI-Express slots. They provide galvanically isolated CAN 2.0B ISO 11898 for CAN transfer rates up to 1 Mbit/s.

The dual-channel PCI-IntelliCAN board is a special design for PCs with PCI slots. The PCI-IntelliCAN is designed for real-time data acquisition and processing by using a fast 16-bit micro- controller. It provides galvanically isolated CAN 2.0B ISO 11898 for CAN transfer rates up to 1 Mbit/s.

Large family of PCI boards manufacturerd by Janz AG. Family members are available for PCI and PCI-Express, 5V or 3,3 V power supply, Short form factor, without and with local intelligence using IBMs PowerPC 405 processor.

IGW/900 is a full-fledged embedded Linux-Computer on site. Besides control tasks IGW/900 has the ability to connect devices without Ethernet interface to TCP/IP networks.
A CAN driver, CAN-Layer-2 and CANopen Server software are available, too.

EtherCAN is a CAN to 10BaseT Gateway. Computer networks worldwide are using Ethernet with the TCP/IP protocol family. With the EtherCAN gateway you are connecting the TCP/IP world with your CAN based control network. Available is a CAN-Layer-2 and CANopen Server software.

For more information about the EtherCAN capabilities you can read the following article.

A paper in German written by Kess Zagers, comparing Ethernet and CAN can be found here.

Industrial PC systems will increasingly be replaced by fanless and maintenance free embedded systems. port offers small but powerful systems featuring ISA or PCI extension slots with passive cooling manufacturerd by Janz AG. The embedded PC systems are suitable to be used as decentralized local control systems.

CAN interface boards for the PC/104 bus. All interfaces with two CAN channels, with or without local intelligence and PC104+.

CAN interface with PCcard (PCMCIA) form factor with local intelligence and two CAN channels.

The AT-CAN-MINI is a plain Basic-CAN interface for PC-AT bus compatible systems. It contains one opto decoupled SJA1000 CAN channel with 2x DSUB-9 connectors and is supported by various drivers.
It is suitable for all kind of applications, where the main processor provides sufficient computation power to serve the Basic-CAN-Interface in an application specific manner.